Sharkoon SHARK ZONE C10 PC-behuizing Zwart, Geel
Reviews van Sharkoon SHARK ZONE C10 PC-behuizing Zwart, Geel
Gebaseerd op 25 reviews
Lastig om de hardware in te bouwen, maar met een beetje geduld en creativiteit wel goed te doen. Is mij gelukt om water koeling erin te bouwen. Beide zijkanten waren beplakt met scythe kaze yu 10cm fans. Maar een 8cm fan op een 12cm plaatst..huh?
Lastig om de hardware in te bouwen, maar met een beetje geduld en creativiteit wel goed te doen. Is mij gelukt om water koeling erin te bouwen. Beide zijkanten waren beplakt met scythe kaze yu 10cm fans. Maar een 8cm fan op een 12cm plaatst..huh?
bob harley
11 september 2022
This is a German design very good value well build, I would advise to get some proper branded 120 mm fans to use with this to improve airflow. Compact this what I needed.
This is a German design very good value well build, I would advise to get some proper branded 120 mm fans to use with this to improve airflow. Compact this what I needed.
PATRICK YAN
10 februari 2021
Lovely case and easy to work with BUT if you have a long GFX card there are two problems, firstly it says it takes 31.5cm cards and although they fit in length ways the long ones will touch the DVD mount of the case thus shorting the circuit board and secondly they have not allowed any room for the larger coolers on these longer cards and unless they are the type that sit flat within the dual slots like the gtx 750 type short card, will stop the case from closing on the side. The leads exiting an ATX PSU if used are also very close to any rear mounted components on the mobo, the ram in my case, which left it touching the main Mobo power lead also you will not be able to get at the power switch after fitting as it uses a fly lead to feed it due to it being fitted in the front of the case but sadly they haven’t provided a replacement isolating power switch on the back of the case.
Lovely case and easy to work with BUT if you have a long GFX card there are two problems, firstly it says it takes 31.5cm cards and although they fit in length ways the long ones will touch the DVD mount of the case thus shorting the circuit board and secondly they have not allowed any room for the larger coolers on these longer cards and unless they are the type that sit flat within the dual slots like the gtx 750 type short card, will stop the case from closing on the side. The leads exiting an ATX PSU if used are also very close to any rear mounted components on the mobo, the ram in my case, which left it touching the main Mobo power lead also you will not be able to get at the power switch after fitting as it uses a fly lead to feed it due to it being fitted in the front of the case but sadly they haven’t provided a replacement isolating power switch on the back of the case.
ExCaLiBuR-UK
3 november 2020
I purchased this to house a PI4 and usb NAS used the case fan to cool pi. Overkill but the only cable that are visible are power and hdmi. A well built versatile case.
I purchased this to house a PI4 and usb NAS used the case fan to cool pi. Overkill but the only cable that are visible are power and hdmi. A well built versatile case.
Lookslikerain75
20 september 2020
One clip on front snapped but still worked nice size can take cd/dvd player .
One clip on front snapped but still worked nice size can take cd/dvd player .
Les
19 januari 2020